Spring Clip, 4-inch

Recommended top clip. Used to hold the 4-inch HydraSleeves open at the top and as a place to attach your tether. Also used to attach the hollow PVC top weight to the top of 4-inch HydraSleeves.
4_INCH_SPRING_CL_4d653d9c6989f.jpg4-Inch and 2-Inch Spring Clips
Sales price $8.00
Total: $8.00
Description

Recommended top clip used to hang the HydraSleeve on the tether.  It will also hold the HydraSleeve in an open formation at the top for faster filling rates.  Leaving the Spring Clip attached to the tether makes it easy to simply re-attach a new HydraSleeve for subsequent sampling events.Shown with 4-inch top weight

Also used to attach the hollow PVC top weight to the top of 4-inch HydraSleeves.  4-inch PVC Top Weights will come with this Spring Clip as the attaching device.

 Please follow this link for the 1-sheet spring clip instructions.

Reusable. Standard material = stainless steel. 3" wide at the bottom x ~5" tall.

PLEASE NOTE:  SPRING CLIPS ARE NOT RECOMMENDED FOR WIRE-WRAP WELLS, OR IF THERE ARE OBSTRUCTIONS OR ROUGH EDGES IN THE WELL.

 

 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

NOTES  DETAILS ARTICLES OF INTEREST
RELATED TO THIS PRODUCT

Should be used with HS-4-2L

We recommend using Spring Clips for most applications. 

Don't use Spring Clips in wire wrap wells or where there are obstacles or rough edges in the well.  Armored sleeves are typically used in such
applications so we don't recommend Spring Clips for the armored bags.

Spring Clip Instructions

Alternative Attachment without spring clips

Spring Clip Basics