
Reusable Drone Cone Adapter (DCA)
2-piece HDPE adapter for use with any of the Super/SkinnySleeves for surface water sampling with a drone. Similar to the PVC Collar, the Super/SkinnySleeves thread between the cone top portion and locking ring and are held in place by the threads.
Can be used with the 2-inch HDSS-1L; PFCHDSS-1L; HDSS-1.5L; HDSS-2L or PFCHDSS-2L SuperSleeves.
OD 3-3/8 inches.
Needs to be used in conjunction with bottom weight, we recommend minimum 5-ounce bottom weight
Assembled length ~2-3/8 inches.
Use the HydraSleeve Super/SkinnySleeve Assembly Instructions found here.
Or see the Drone Cone Video for specific detailed assembly instructions.
Oscillation of the assembly 2 times within the sample zone is recommended prior to retrieving the assembly to the surface to ensure the sampler is full.
P.O. BOX 1266
MESILLA PARK, NM 88005
575-523-5799
ÂÂ
March 5, 2012
ÂÂ
Sent by email
pkinckner@envstd.com
ÂÂ
Hi Pam:
Thank you for your recent credit application.
We have reviewed the application and contacted your references. Unfortunately the responses from your references were unfavorable.   One particular reference stated terms of up to 90 days with payments running at 110 days. Our strict policy is to extend credit to only 30 days with payments being received in a timely manner. Your other references were fine; we are just concerned about the timing of this one particular reference.  Therefore we must leave the account on credit card terms, or, if you like, you can send payment in advance and we will ship when the check is received.
If you would like us to re-evaluate the credit situation, we can do so again in February 2013. Please let me know at that time that you would like to submit another credit application and we can start the process again.