NEW: Universal Super/SkinnySleeve 1-liter made from extruded HDPE for sampling PFC's (PFCSS-1L).
Fits both Schedule 40 (SuperSleeve) and Schedule 80 and 50 mm (SkinnySleeve) wells.
Use in conjunction with the SuperSleeve or SkinnySleeve 2-piece top weight or 2-piece collar.
The size of the hardware determines well diameter capability.
Compresses to approximately 10 inches from the bottom of the well using SuperSleeve Top Weight for schedule 40 wells.
Compresses to approximately 12 inches from the bottom of the well using SkinnySleeve Top Weight for schedule 80 and 50mm wells.
Disposable. Standard material extruded opaque virgin HDPE.
Packaged in Ulta-Clear Polypropylene ziplocs with no writing.
Will require the 2-piece top weight or 2-piece collar along with a bottom weight.
|SAMPLER LENGTH||WEIGHT TYPE||MINIMUM WELL DIAMETER||PULL TO FILL DISTANCE*||COMPRESSED BY TOP WEIGHT**||
MINIMUM SATUATED SCREEN
|36"||1.5" OD Top Wieight
|2-inch Sch. 80 or 50mm
|~12 inches||~4 feet with top weight|
|36"||1.9" OD Top Weight
|2-inch Sch. 40
|~10 inches||~3.5 feet with top weight|
* Distance the sampler needs to move upward to fill completely. The top of the sampler marks the beginning of the sample interval.
** Average distance from top of sampler to the bottom of the well when compressed by the top weight. Sleeve is lowered into the well fully extended below the weight, not rolled and inserted inside the weight.
|DETAILS||ARTICLES OF INTEREST
RELATED TO THIS PRODUCT
REQUIRED YOUR CHOICE
SkinnySleeve Top Weight
SkinnySleeve PVC Collar
|This style bag must have either a top collar or top weight.
There is no stiffener, therefore it needs a piece of hardware
at the top which serves as a connection point and it assists
in this style bag filling faster.
Get SuperSleeve sizes for Schedule 40 wells; or
SkinnySleeve sizes for Schedule 80 or 50 mm wells
Use top weights to compress the bags into the bottom of
the well for short water columns; and use collars when there is
sufficient saturated screen and no compression is necessary.
When to use Super or SkinnySleeves
Spring Clip Instructions
Recommended for top weights
Recommended for collars
|All Super/Skinny Sleeves will require a bottom weight to go with
the top weight.
|Weight Selection Chart|
|How to shorten HydraSleeves for less sample volume|
|Sand Weight Clips - for attaching
the bottom of HydraSleeves to the tether.
Typical for multiple sleeve deployment.
|About bottom (sand weight) clips|